Normal 0 false false false MicrosoftInternetExplorer4
Building backyard fishponds is not as easy as ABC. It requires careful planning, imagination and patience. Avoid finishing your pond when the ground is still frozen or too wet. Summer is the best time to build your fishpond. You can decide to install a prefabricated liner, but you have to dig a hold to the correct depth and dimension of the liner.
These types of backyard fishponds require you to backfill around the sides before adding water, pumps, plants and fish. To make your pond more attractive, use your imagination and landscape around it.
Best ways to put a PVC backyard pond liner
Choose the best location. With the use of a rope, lay out the shape of your desired pond on the ground. Finish the design and dimension of your pond before digging. Don’t throw away the topsoil because you can still use it when you are landscaping the pond.
The depth of a backyard fishpond depends on your choice, although the standard depth is between 18 and 24 inches. Some add tiers around the side of the pond at various depths to place different aquatic plants
Check out for any rocks from the excavated area and remove them. To prevent pucture on the PVC, you can add a layer of damp sand at the bottom of the excavated area.
Spread the PVC liner over the excavated area and let it sag. Place some heavy rocks or bricks around the edge to keep the plastic in place. Start adding water onto the pond and allow the weight of the water to smooth out the liner. Gently remove the bricks and allow the plastic to conform to the contours of the hold. Gently pull out the wrinkles.
To complete the installation of this kind of backyard fishponds, install pumps and filter to better maintain the pond. The pump and filter that you will install must be adequate to handle the volume of water in your pond. A pump is crucial in allowing oxygen to circulate into the pond.
Leave a Reply